Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USER MANUAL IQN/F
Control Panel
The outer panel is located at the front of the machine, in the upper left corner and has five buttons:
OP1
OP2
OP3
OP4
OP5
(1) OP1. ON/OFF button
When turning the machine on at the rear switch, OP1 will be lit red, which means that the machine will be in standby.
Pressing the OP1 button will enter the timing state and the led will light up with an intermittent blue. After the time
period elapses, the LED will remain solid blue and the machine will start to work.
If an alarm is activated on the machine, pressing the button for more than 3 seconds will restart the machine.
(2) OP2. Storage full alarm
This LED will light up when the machine has stopped because the storage is full.
(3) OP3. Motor reducer alarm
This Alarm has two states.
In the first, the LED will remain intermittent and the machine will synchronise and automatically resume. The machine
will continue to operate in this state.
In the second state, the LED will remain in a fixed position and the machine will be stopped until it is reset.
(4) OP4. Internal fault alarm
This LED will remain on when an internal fault has occurred in the machine, or if there is a blockage in the outlet.
The machine will stop when in this state.
(5) OP5. Water supply shortage alarm
This LED indicates that there is no water supply and therefore the machine is stopped because it cannot make ice.
5
Tabla de contenido
