Reception Of The Machine; Installation - ITV ICE MAKERS IQN NUGGETS Manual De Usuario

Reception of the machine

Inspect the packaging externally. If it looks broken or damaged, INFORM THE CARRIER.
To determine if the machine is damaged, UNPACK IT WITH THE CARRIER PRESENT to record any issues on the reception
document, or in a separate document. Since 1 May 1998, we have complied with the European regulations on packaging
management and packaging waste, indicated by the distinctive green dot on the packaging.
Always state the machine and model number. This number is printed in three places:
(1) Packaging: There is an exterior label with the manufacturing number. (1)
(2) Exterior of the equipment: Located on the back of the unit, the same label as before.
(3) Details plate: Located on the back of the machine. (2)
Check that the installation kit with the machine includes:
• Manual.
• Warranty label indicating serial number.
ATTENTION: All the packaging (plastic bags, cardboard boxes and wooden pallets), should not be left within the reach
of children as they are a potential source of danger.

Installation

THIS ICE MAKER IS NOT DESIGNED TO OPERATE OUTSIDE.
Incorrectly installing the equipment can cause damage to people, animals
and other things, for which the manufacturer will not be held responsible.
(1) Site conditions
ATTENTION: The machines are designed to operate at ambient temperatures
between 5ºC and 43ºC, (41ºF and 109ºF) and with water inlet
temperatures between 5ºC and 35ºC (41ºF and 95ºF).
Below the minimum temperatures will excessively force the reducing motor.
Above the maximum will shorten the life of the compressor and considerably
decrease production.
Do not place anything on the machine or in front of the grille.
(1)
3
USER MANUAL IQN/F
(2)
(3)