Dometic GROUP Waeco MagicSpeed MS880 Instrucciones De Montaje página 82

Connecting the electrical power to MagicSpeed
Recording travel speed signals
NOTICE!
A
On vehicles with manual transmission, an engine overspeed
protection must be installed.
You can record the travel speed signal at the following positions:
Position
Speed signal transmitted via the engine controller
Electronic speed sensor
(on the rear of the instrument assembly or as part
set of the instrument assembly)
Travel speed sensor
(this is installed in the transmission and generally
has three cables)
Car radio
(near the radio, if the vehicle has an ISO connec-
tion. The travel speed signal is in chamber 3,
contact pin 1 or 5)
Recording engine speed signals
You can record the engine speed signal at the following positions:
Position
Engine speed signal transmitted via the engine
controller
Electronic speed sensor
(on the rear of the instrument assembly or as part
set of the instrument assembly)
Negative terminal end of the ignition coil
(terminal 1)
(The yellow cable must be used for this type of
connection)
82
MagicSpeed MS880
Voltage Frequency
V Hz
1,5 – 24 6 – 8500
1,5 – 24 6 – 8500
1,5 – 24 6 – 8500
1,5 – 24 6 – 8500
Voltage Frequency
V Hz
1,5 – 24 6 – 8500
1,5 – 24 6 – 488
6 – 250 6 – 488
EN