Kreg Jig K4 Manual De Instrucciones página 5

A.
Toggle Clamp:
Secures workpieces while drilling Pocket-Holes. Use fi rm pressure to lock in place.
Clamp Pad:
B.
Rotate clockwise or counter-clockwise to compensate for workpiece thickness.
Drill Guide:
C.
The "core" of the Kreg Jig®. Can be used in the Kreg Jig® or removed for repair applications.
D. Drill Guide Adjustment Markings:
Markings indicate the Drill Guide's height setting. Match with workpiece thickness.
Screw Holes (4):
E.
To minimize movement during use, secure the jig to your workbench using 4 wood screws.
F.
Clamping Recess:
For a less permanent solution, clamp your jig to your workbench with a Bar or C-Clamp.
G.
Drill Guide Pin:
Locks Drill Guide into place while adjusting height for different material thicknesses.
H. Drill Guide Spacer Block:
For repair applications. Each spacer compensates for an additional ¼" in material thickness.
Depth Collar / Allen Wrench:
I.
Sets the maximum plunge depth of drill. Use Allen Wrench to lock into place on the bit.
J. Depth Setting Gauge:
Helps you fi nd the correct Depth Collar setting for varying workpiece thicknesses.
®
Kreg Jig Components
www.kregjig.com