Kreg Jig K4 Manual De Instrucciones página 9

For repair applications, the Drill Guide can be removed completely
from the benchtop base, and taken directly to the problem joint
serving as a 'mobile Kreg Jig
When you bring the bottom of the Drill Guide to the
edge of the joint for a repair, the jig is set correctly
1
to center a screw in
larger stock, you'll need to compensate with the
included Spacer Block. Each Spacer Block you add,
compensates for another ¼" in material size. For
3 ⁄ "
material, use 1 block. For 1" material, use 2
4
blocks, etc.
Additional blocks can be purchased at kregjig.com
In repair applications, when using the Drill Guide
separately, remember that you still have to set the
Depth Collar and make sure the jig is secured to the
workpiece. You also need to ensure that the Drill
Guide is fi rmly secured to the workpiece using a bar
clamp or c-clamp. In certain situations where the
use of a clamp is not possible, you may also screw
the Drill Guide directly to the workpiece, as shown.
®
'.
⁄ "
material. If the joint uses
2
Repair Applications
www.kregjig.com