Kreg Jig K4 Manual De Instrucciones página 8

Pocket-Hole Placement
Along with the Kreg Jig
strongest possible Kreg Joint is to space your Pocket-Holes evenly across
the workpiece. Your Kreg Jig
which lets you do this in a wide variety of workpiece widths without the
need to reposition the workpiece after each hole is drilled. Use the guide
below to determine how to best clamp your workpiece and drill your
Pocket-Holes.
1" to 2"
Wide Material
Use B and C Holes
For panels, we recommend placing the fi rst Pocket-Hole roughly 2 inches
away from the exposed edge of the panel, and every 6" after that. When
drilling panels, you can use any of the Drill Guide's three holes.
800-447-8638
®
Settings, another important part of getting the
®
features a patented 3-hole Drill Guide
2" to 3"
Wide Material
Use A and B Holes
3" to 4"
Wide Material
Use A and C Holes