Installation Of The Oven; Electricals; Respect For The Environment - Fulgor Milano FCPO 6213 P TM Instrucciones Para La Instalación Y Uso

3 - Installation of the Oven

EN
To install the oven into the kitchen a cutout should be made
in accordance with the dimensions shown in the Cutout &
Dimensions figure.
The apparatus is to be fastened to the top by means of the two
screws provided in the kit through the holes made on the oven
uprights.
WARNING
As the apparatus is to be fitted in your kitchen furniture,
make sure that all surfaces in contact with the oven can resist
a temperature of approx 90°C.

Electricals

Absorbed power:
oven top element:
oven bottom element:
round element (hot air):
roasting jack motor:
lamp:
hot air fan motor:
cooling fan motor:
Maximum absorbed power: (see data plate)
Supply voltage:
4
1200+1000W 230V
1200+1000W 240V
1100W 230V
1100W 240V
2300W 230V
2300W 240V
(on some models)
4W
(on some models)
25W
25W
25W
(see data plate)

Respect for the environment

The documentation for this appliance is printed on paper
bleached without chlorine or recycled paper to contribute to
protecting the environment. The packaging was designed
to prevent damage to the environment; they are ecological
products that can be recovered or recycled.
Recycling the packing saves raw materials and reduces the
volume of industrial and domestic waste.
THE PACKING MATERIAL is 100% recyclable and marked
with the recycling symbol. Dispose of in conformity with
local law. The packing material (plastic bags, polystyrene
parts, etc.) must be kept out of the reach of children because
it is potentially dangerous. THIS APPLIANCE is marked in
conformity with European Directive 2012/96/UE, Waste
Electrical and Electronic Equipment (WEEE). By making sure
that this product is disposed of correctly, the user contributes
to preventing potential negative consequences for the
environment and health.
THE SYMBOL on the product or accompanying documentation
indicates that this product must not be treated as domestic
waste but must be delivered to a suitable collection point for
the recycling of electrical and electronic equipment.