To Install Modul 25; Tool Inspection; Tool And Work Area Set-Up - Rothenberger Modul Pipe 25/16 Instrucciones De Uso

Figure 4 - Cable Connections (Connector Style A, Black Color)
NOTE: Connector is the same for either ROSCOPE 1000/i2000 imager (or) Modul 25/16.
3.5

To Install Modul 25/16

Figure 6 shows the procedure for installing the ROSCOPE 1000/i2000 handheld unit to the moun-
ting cradle on the Modul 25/16 .
Figure 6 - Installing ROSCOPE 1000/i2000 handheld unit to the mounting cradle
3.6

Tool Inspection

1. Keep connectors clean.
2. Inspect Battery for signs of wear or damage.
3. Clean any foreign contaminants (grease, dirt, oil or sewage) from the device. Imager glass
must be free of any debris to ensure optimal performance.
4. Be aware of all warnings on label as shown in Figure 7.
Figure 7 – Warning Label
3.7

Tool and Work Area Set-Up

• Check work area for proper lighting,
• Flammable liquids, vapors or dust are not present in the work area.
22
Slot
Key
ENGLISH