Aqua Medic reefdoser EVO 4 Manual De Instrucciones página 7

7. Changing the pump head
Beforehand, please pull the plug so that no dosage takes place during the change.
The pump head including wheels and tube is available as a spare part. To change the pump head, the two side
clips must be compressed in order to separate the head from the screwed on white base. Maybe, you have to
use a small screwdriver between the base plate and bottom plate of the pump head and lift the head slightly.
When fitting the new head, make sure that the axle is placed exactly between the three wheels. It must be
centered in front, visible in the opening.
8. Technical data power plug
Input: 100 - 240 V AC / 50 - 60 Hz
Output: 12 V DC 2.0 A
Available spare parts: Please refer to www.aqua-medic.de.
9. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,
we will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved - 04/2019
7