Cleaning And Winterizing; Specifications - Dometic DHT-L Serie Manual De Instrucciones

Hose Installation
Avoid clamps with nickel-plated screws that are susceptible to corrosion . Use 100 percent stainless
steel clamps .
Note
If a clamp screw is slightly magnetic, it may be either a lower grade of stainless steel or
nickel plated .
7

Cleaning and Winterizing

7.1 Cleaning
A small amount of water remains in holding tanks at all times, so it is good practice to rinse a holding
tank completely after contents have been discharged .
1 . After initial pump-out, add holding tank deodorant or cleaner to toilet bowl, and flush with water .
2 . Continue flushing and pumping out tank until holding tank discharge is clear .
7.2 Winterizing
Use only propylene glycol freshwater antifreeze to winterize the holding tank . Make sure the
antifreeze does not contain alcohol.
1 . Pump out the holding tank .
2 . Thoroughly flush system with fresh water before adding propylene glycol freshwater antifreeze
to the holding tank .
8

Specifications

Materials
Holding tank:
Fittings:
Sealing grommets:
Capacity
Model
L / US gal.
DHT42L 42 / 11
DHT61L 61 / 16
DHT88L 88 / 23
DHT110L 110 / 29
DHT137L 137 / 36
Dometic DHT-L series holding tanks are pressure-tested to 30 kPa (0 .3 bar, 4 PSI) .
14
polyethylene; 6 .3 mm nominal wall thickness . Natural color .
polyvinyl chloride, ABS . White color .
cross-linked EPDM rubber/polypropylene . White color .
Empty Weight
Kg / lb.
5 .4 / 12
7 .7 / 17
10 .2 / 22 .5
14 / 30 .9
14 .5 / 32
Full Weight
Kg / lb.
47 .9 / 105 .5 460 x 350 x 348 / 18 . 1 x 13 .8 x 13 .7
69 .4 / 153 660 x 350 x 348 / 26 .0 x 13 .8 x 13 .7
98 .9 / 218 800 x 400 x 388 / 31 .5 x 15 .7 x 15 .3
125 .9 / 277 .4 1200 x 350 x 348 / 47 .2 x 13 .8 x 13 .7
153 .3 / 338 1200 x 400 x 388 / 47 .2 x 15 .7 x 15 .3
Dometic Holding Tanks
Dimensions
mm / in.