Overview; Important Safety Instructions; General Information; General Safety Instructions - Rohde Ecotop 20 Manual De Instrucciones

Enjoy your results

3. OVERVIEW

Pressure spring-supported Cover can be opened easily to its widest
opening mechanism on angle, stable frame
cover
Safety switch
Exhaust air socket
Solid State Relays standard
for all TE-S and Ecotop models
Metal handles for
transport
Castors on back legs for
easy transport (TE 20 – 110)
Unique swivel kiln stand All models can be disassem-
bled, some can be extended
4
Page of 16
Bricks are secured against
displacement
Kiln cover joined mortar-free
Heating elements fi xed in exact position
Thermocouple installed in a safe
position
Tidy brick edges
Adjustable and lockable
cover sealing
114 mm 110 mm
Air supply handle for all Wall structure 3-layer wall
Toploader models Toploader structure Ecotop
professional series
TE-S
95 mm
Wall structure Toploader
studio series TE-MCC+
Level: 02 / 2013

4. IMPORTANT SAFETY INSTRUCTIONS

4.1. General information

Please make sure that you fully understand both the safety instructions and the safety icons, in order to eliminate
potential dangers. Before starting to operate the kiln, make sure that you read and fully understand the following
safety instructions.
Keep your instruction manual available at all times. For your own safety only use original spare parts!
Helmut Rohde GmbH does not assume any liability for damage resulting from incorrect or defective heating elements
from other manufacturers. Use only original spare parts - otherwise all warranty claims become void.

4.2. General safety instructions

Caution: Hot surface.
Do not open while hot.
Caution: Disconnect power plug
before opening the switch box!
(BGV A8).

4.3. Operating safety instructions

The ROHDE kiln can only be operated safely if the safety instructions are carefully followed:
• When operated industrially, the kiln and controller must undergo a safety check to ensure correct functionality. This
should be carried out by a qualifi ed electrician before the initial operation and then at 4-year intervals in accordance
with BGV A3.
• Maintenance and repair of electronic components must be carried out by a qualifi ed electrician.
• For safety reasons the kiln must be disconnected from the mains supply before any maintenance work is carried
out.
• The kiln must not be operated with an extension cable!
Level: 02 / 2013
Caution: Dangerous electrically live
components.
The CE marking indicates that the
inspections for conformity have
been correctly carried out in accor-
dance with EC standards:
Directive 2004/108/EC
Directive 93/68/ECC relating to CE
marking.
5
Page of 16