Blow-Sweeping; After Finishing Work; Transporting; Transporting The Blower - Stihl BGA 100 Manual De Instrucciones

12 After Finishing Work

► Override the trigger's (1) end position and hold it there.
The LEDs flash in sequence. The boost function is
activated.
The boost function is deactivated when you release the
trigger (1). The previously selected power level is restored.

11.4 Blow-Sweeping

► Point the nozzle at the ground.
► Walk slowly and steadily forwards.
12 After Finishing Work
12.1 After Finishing Work
► Switch off the blower, move retaining latch to position
and pull the connecting cable plug out of the socket.
0458-711-9621-A
1
► If the blower is wet: Allow the blower to dry.
► Clean the blower.

13 Transporting

13.1 Transporting the Blower

► Switch off the blower, move retaining latch to position
and pull the connecting cable plug out of the socket.
► Carry the blower by the control handle.
► Transporting the blower in a vehicle: Secure the blower to
prevent turnover and movement.

14 Storing

14.1 Storing the Blower

► Switch off the blower, move retaining latch to position
and pull the connecting cable plug out of the socket.
► Observe the following points when storing the blower:
– Blower is out of the reach of children.
– Blower is clean and dry.

15 Cleaning

15.1 Cleaning the Blower

► Switch off the blower, move retaining latch to position
and pull the connecting cable plug out of the socket.
► Clean the blower with a damp cloth.
► Clean the intake screen with a soft brush.
English
37