Technical Specifications - Beurer EA 34 Instrucciones De Uso

7

Technical specifications

Dimensions (WHD)
Weight
Output curve form
Pulse duration
Maximum output voltage
(at 500 Ohm)
Stimulation frequency
Stimulation programmes
Intensity settings
Power supply
Battery life with 30 mins usage/day
Safety class
Operating conditions
Storage conditions
We retain the right to make technical modifica-
tions to improve and further develop the product.
If the unit is used outside of the spe-
cifications, proper function is no
longer guaranteed!
This unit complies with European Norms
EN60601-1, EN60601-1-2 and EN60601-2-
10 and is subject to special precautions re-
garding electromagnetic compatibility. Note
that portable and mobile RF communication
equipment can affect this unit. Further de-
tails may be obtained from the Customer
Service address provided.
45 x 148 x 122.5 mm
0.21 kg (including batteries)
monophasic rectangular pulse
200 to 360 Ps
35 V ± 20 %
10 – 20 Hz
3
15
3 V (2 x 1.5 V AA, LR06)
approx. 2 months (30 min/day)
Type BF applied part
5 – 40 °C; ” 80 % humidity
-20 °C to +55 °C, ” 95 % relative humidity
The unit conforms to the requirements of
the European Directive for Medical Prod-
ucts 93/42/EC, the MPG (German Medical
units Act).
Current parameters
The device works with the following pa-
rameters which, depending on the setting,
impact differently on the stimulation effect:
Pulse form
This describes the waveform of the excita-
tion current. For monophasic oscillation
pulses, current flows in one direction; for
biphasic oscillation pulses, the excitation
current changes its direction.
32