Technical Specifications - Beurer EM 29 Instrucciones De Uso

If you cannot find a solution to your problem here, contact
our Customer Services.

10. Technical specifications

Circumference of
the cuff
Type
Weight
– Device
– Device, cuff and
cable
Electrode size
Parameter (500 ohm
load)
Pulse length
Waveform
Voltage supply
Approx. 25 to 70 cm
EM 29
– Approx. 90 g incl. batteries
– Approx. 210 g incl. batteries
Approx. 114 x 59 mm
Output voltage:
max. 50 Vpp / 5.5 V rms
Output current:
max. 100 mApp / 11 mArms
Output frequency: 2 – 110 Hz
60 – 220 μs per phase
Symmetric, biphasic rectangu-
lar pulse
4.5 V
(3 x 1.5 V AAA, type LR03)
Operating conditions
Storage
The serial number is located on the device or in the battery
compartment.
We reserve the right to make technical changes to improve
and develop the product. If the device is not used accord-
ing to the instructions specified, perfect functionality can-
not be guaranteed! This device complies with European
standards EN60601-1 and EN60601-1-2 (In accordance
with CISPR 11, IEC 61000-4-2, IEC 61000-4-3 and IEC
61000-4-8) and is subject to special precautionary meas-
ures with regard to electromagnetic compatibility. Please
note that portable and mobile HF communication systems
may interfere with this device. More details can be request-
ed from the stated Customer Service address or found at
the end of the instructions for use.
This device meets the requirements of European Directive
93/42/EC for medical products, as well as those of the
Medizinproduktegesetz (German Medical Devices Act). For
this device, a functional test and instruction in accordance
with Section 5 of the Medical Devices Operator Ordinance
(MPBetreibV) is not required. It is also not necessary to
carry out safety checks in accordance with Section 6 of the
Medical Devices Operator Ordinance (MPBetreibV).
30
0 °C to 40 °C,
20 to 65% relative humidity
0 °C to 55 °C,
10 to 90% relative humidity