Cleaning And Maintenance - Domo DO7108S Manual De Instrucciones

CLEANING AND MAINTENANCE

1. Unplug the appliance and let it cool down before cleaning it.
2. Wipe residues from the soleplate with a damp cloth or with a non-abrasive (liquid)
cleaner.
Caution: Do not use any chemical, steel, wooden or abrasive cleaners to scrape the
soleplate.
3. Clean the upper part of the iron with a soft, damp cloth.
4. Wipe the water drops on the steam generator and the
thermal insulation pads with a dry cloth.
5. When not using the steam generator for a long time,
pour out the water from the water tank and place
the iron on the thermal insulation pads to store the
appliance.
6. Store the steam hose and the power cord in the storage
area provided.
CAUTION: Only use tap water (or 50% tap water and 50% demineralized water in case of
hard water) in your steam generator. Careful: De-scaled or de-mineralised water must never
be used on its own, but must be combined with tap water. In case of use of a "softener" and/
or perfumed water, brown stains could emerge, which would cause damage to the steam
chamber.
DESCALING
When the indicator light of the de-scale button lights up, the
appliance must be de-scaled.
1. Allow the appliance to cool down completely before de-
scaling.
2. Remove the water reservoir. Rotate the appliance and open
the lid for de-scaling at the bottom of the appliance.
3. Place the appliance on a heat resistant collecting container.
Fill the water reservoir and replace it in the iron.
4. Put the plug in the socket. Turn the appliance on with the on/off button. Press and hold
the steam button and the de-scale button simultaneously for 1 to 2 seconds. You will
hear a signal, after which the indication light
of the de-scaling button will begin to flash.
The appliance will begin to steam and all lime
residue will be removed. After about 3 minutes,
you will hear a longer signal. The appliance
is now finished de-scaling and will turn off
automatically.
CAUTION: the steam is hot. To avoid being
burned, do not touch the container during the de-scaling process.
www.domo-elektro.be
33
DO7108S