Sharp FU-28H Manual De Uso página 10

INSTALLATION
Before starting the wall installation, be sure to remove the front panel
and filter frame.
3
Install the unit on the wall.
1
Place the unit facing
up, remove the Front
Panel and Filter Frame.
2
Adjust the length of the power cord.
1 Measure the distance between the unit and the wall outlet.
(Refer to E-6)
2
Place the unit face down, and insert the
power cord into the power cord adjust-
ing guide so as to adjust it to the meas-
ured length.
Power Cord
Adjusting Guide
In case the power plug to be lead
to the right of the unit.
Power cord adjusting guide
Cautions
• To avoid scratching or damaging the unit, place it on a soft piece of cloth
until it is installed on the wall.
• Do not lead the power cord together with other cord and do not twist it.
• Never modify the power cord.
• Take care not to damage the power cord.
Front Panel
2
Air Outlet
E-8
Filter Frame
1
Do not wire the
power cord right
below the wall
mounting bracket.
In case the power plug to
be lead to the left of the
unit.