Connecting And Setting The Microwave - Dometic MWO 240 Instrucciones De Uso

MWO240
Item in
fig. 2, page 3
10
11
12
6

Connecting and setting the microwave

6.1 Setting up the microwave
Observe the following instructions when setting up:
•
Make sure that all packaging materials are removed from the inside of the door.
•
Check the microwave oven for damage such as a misaligned or bent door, dam-
aged door seals and sealing surfaces, broken or loose door hinges, and latches
and dents inside or on the door. If you notice any damage, do not put the micro-
wave oven into operation and contact qualified service personnel.
•
The microwave oven must be placed on a flat, stable surface that can support its
weight as well as the heaviest possible food.
•
Place the microwave oven at least 85 cm above the ground.
•
Do not place the microwave oven near heat, moisture, high humidity or flamma-
ble materials.
•
Proper operation of the microwave oven requires a sufficient air supply. Keep a
sufficient distance (approx. 5 cm) to the outer walls in order to ensure heat
exchange. Do not cover or block openings on the microwave oven. The feet
should not be removed.
•
Make sure that the connection cable is undamaged and does not run under the
microwave oven or across a hot or sharp surface.
•
Do not use the microwave oven outdoors.
EN
Connecting and setting the microwave
Explanation
– Set the cooking time
During operation: Reduce the cooking time or the
weight during operation
+ Set the cooking time
During operation: Increase the cooking time or the
weight during operation
Door opener
9