Power Off Timer Function - Sammic L-EQ Manual De Usuario

- SERIAL CABLE CONFIGURATION
Demonstrative program of pc communication
The purpose of demostrating pc and weight scale communication, we developt a software for check
weight on the pc monitor.
Program name
Scale.exe
Connection
Firsly connect the scale to the pc serial port, using the serial cable. First power on the scale and
later the pc.
Scale.exe program
1.- download the scale.exe program from http://www.fabatsa.com.mx in soporte select software y
manuales, then click on software scale and save it on your hard disk.
2.- unzip the downloaded file on c:\scale\
3.- go to scale subdirectory.
4.- select scale.exe program and press <enter>
Information format sended to pc
Normally, it was sent through port serial, the following information in ascii code:

POWER OFF TIMER FUNCTION

This function is permanently activated when the scale is on, and only when you do not have the
ac/dc power supply connected to the scale. When you do not use the scale for a period of time
approximate to 15 minutes, it will automatically turn off. To turn on the scale again, just press the
key
The power off timer function permit you to save electricity and avoid constant battery recharges.
14 ENGLISH
Serial cable configuration
System requirements
- 80386sx processor or higher
- mouse
- windows 3.1 or higher
Text section
Serial cable configuration
Weight section
Units section