Operations Description; How To Weight A Product; How To Use "Tare" (Keypad/Footswitch) - Sammic L-EQ Manual De Usuario

HOW TO WEIGHT A PRODUCT

Turn your scale on pressing the key. At this moment the scale is ready to weight.
Then place the product to weight on the plate and you will see the weight in the alphanumeric
display. The "kg" symbol will appear in the display. For example, if you place a product whose
weight is 3 kg, you will see the following
HOW TO USE THE "TARE" (KEYPAD/FOOTSWITCH)
When you wish to weight a product in a container and you do not want to consider the container's
weight during the operation, you can use the "tare" function. To use this function, follow these steps:
suppose you are going to weight 5 kg of some product in a container that weight 10 kg.
1.- Place the empty container on the scale.
2.- Press the key or the footswitch. Then the display will show:
Note: if the weight displayed on the display is changing the tare function cann't be enabled.
3.- Put the product inside the container and the scale shows only the weight of the product without
the container's weight. Note: when you remove the container a negative number (weight of
container) appears in the display
It is important to mention that this function is subtractive. For example, if we have a container that
weight 1 kg, the scale will only be able to weight up to 1 kg of product to complete the maximum
capacity (3 kilograms in a l-eq 4 model).to cancel the tare function just press the
footswitch and the scale will return to the normal function. The tare symbol will disappear
The two following observations are specially important.
A) when there is no weight on the scale (container) you can not activate the "tare" function.
B) when a container is "tared", but when you remove it from the plate and you remove a larger
weight than the container, (grease, remaining of a product, etc.), or when the plate is slightly
lifted with your hand. "neg" (negative) will appear.
VII.- OPERATION'S DESCRIPTION
key or the
ENGLISH 11