Display Lcd - Sammic L-EQ Manual De Usuario

DISPLAY (LCD)
1.- "ALPHANUMERIC" INDICATOR:
SHOWS THE PRODUCT'S WEIGHT IN KILOGRAMS, THE ALPHANUMERIC INDICATOR
THE FOLLOWING READINGS:
OVRLOAD
NEG.
LOWBAT.
HELP
UNLOAD
HI LMT?
LO LMT?
2.- ( )"low battery" indicator:
Is shown when the energy of the battery is too low, this indicator turns on to tell us that it is
necessary to recharge it.
3.- "AC/DC" power supply indicator:
When the ac/dc power supply is connected to the scale this indicator turns on.
4.- "Zero" indicator :
These references to zero indicate that the scale is ready to start weighting products. The zero
indicator disappear when a load is placed on the scale.
5a.- "Net" indicator:
Indicates that the "tare" function has been activated. The readings shown correspond to the net
weight.
6.- "Low" alarm indicator:
When it is setting low alarm limit or when low limit is displayed, or when weight is lower than low
alarm limit this indicator turns on.
7.- "High" alarm indicator:
When it is setting high alarm limit or when high limit is displayed, or when weight is higher than
high alarm limit this indicator turns on.
10 ENGLISH
2
IS SHOWN WHEN THERE IS AN OVERWEIGHT ON THE SCALE.
IS SHOWN WHEN THERE IS A NEGATIVE WEIGHT.
IS SHOWN WHEN THE BATTERY DOES NOT HAVE ENOUGH ENERGY.
IS SHOWN WHEN YOU TURN ON THE SCALE WITH AN EXCESSIVE WEIGHT.
IS SHOWN WHEN THE SCALE IS TURNED ON WITHOUT THE PLATE.
IS SHOWN WHEN THE SCALE IS READY TO SET ALARM LIMITS.
1
5a
4 5b
3
6
CAN SHOW