Troubleshooting - Philips Senseo CA6500/60 Manual De Instrucciones

Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go
to your Philips dealer. You can also contact the Philips Consumer Care Centre in
your country (see the worldwide guarantee leaflet for contact details).
Recycling
- This symbol on a product means that the product is covered by
European Directive 2012/19/EU. Inform yourself about the local
separate collection system for electrical and electronic products. Follow
local rules and never dispose of the product with normal household
waste. Correct disposal of old products helps prevent negative
consequences for the environment and human health (Fig. 1).
Guarantee and support
If you need information or support, please visit www.philips.com/
support or read the separate worldwide guarantee leaflet.

Troubleshooting

This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.
Problem Possible cause
The light in You just prepared
the button hot frothed milk
flashes or hot milk and
but the pressed the
appliance button for milk or
does not hot frothed milk
operate. again straightaway
without letting
the appliance cool
down.
The temperature of
the milk is too high.
The appliance You have not placed
does not the lid properly on
froth. the appliance.
You did not attach
the frothing coil
to the coil holder.
You used a type
of milk that is
not suitable for
frothing.
The inside of the
milk jug is polluted
with milk residues,
which prevents
the coil holder
from rotating.
Milk froth You put too much
escapes milk in the milk jug.
from under
the lid.
The milk is This is normal.
not very hot.
Not all milk This is normal.
has been
frothed.
Solution
If you want to prepare hot frothed
milk or hot milk again straightaway,
the milk jug needs to cool down for
a few minutes before you can use it
again. As long as the milk jug is still
hot, the temperature limiter makes
sure that the appliance cannot be
operated. You can rinse the inside of
the milk jug with cold water to let it
cool down faster.
Replace the warm milk with cold milk
or let the appliance cool down.
Place the lid properly.
Attach the frothing coil to the coil
holder.
Fresh milk is not always consistent
and many factors can influence the
quality of the milk froth (like protein
content). If the milk does not froth
as you would like, try a different type
or brand of milk. Use semi-skimmed
cow's milk at refrigerator temperature
for the best frothing result.
Clean the coil holder and the inside
of the milk jug.
Do not fill the milk jug beyond the
MAX indication.
The milk is heated up to approx 74°C
to ensure the best froth and taste.
Milk proteins start to break down
and burn if the milk is over heated.
The appliance does not froth all
the milk. The appliance created the
optimal milk-froth ratio. The milk
easily mixes with coffee or other
beverages and the milk froth stays
on top for a delicious head.
Rinse the milk jug, the lid and the frothing coil with hot water and dry all
parts before you use the appliance for the first time.
If you want to prepare hot frothed milk or hot milk again straightaway, the
milk jug needs to cool down for a few minutes before you can use it again.
You can also heat up milk without frothing it. In this case you do not need
to use the frothing coil. For hot preparations press the button shortly, for
cold milk froth keep the button pressed for 3 seconds.
Do not immerse the base and the milk jug in water or any other liquid.
Do not clean them in the dishwasher either. Never use sharp objects,
scouring pads, abrasive cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
For all questions regarding the milk frother that you bought together with
the SENSEO machine, please contact the Consumer Care Centre in your
®
country instead of your Philips dealer.
DANSK
Introduktion
Tillykke med dit køb og velkommen til Philips! For at få fuldt udbytte af den
support, Philips tilbyder, skal du registrere dit produkt på www.philips.com/
welcome.
Vigtigt
Læs disse vigtige oplysninger omhyggeligt igennem, inden apparatet tages
i brug, og gem dem til eventuel senere brug.
Fare
- Kom aldrig basisenheden og mælkekanden i vand eller anden væske.
Kom heller aldrig disse dele i opvaskemaskinen.
Advarsel
- Kontrollér, om den angivne netspænding på apparatet svarer til den
lokale netspænding, før du slutter strøm til apparatet.
- Tag altid stikket ud af stikkontakten, når du går fra apparatet, samt før
du samler det, skiller det ad eller rengør det.
- Apparatet må kun sluttes til en stikkontakt med jordforbindelse.
- Brug ikke apparatet, hvis stik, netledning eller andre dele er beskadigede.
- Hvis netledningen beskadiges, må den kun udskiftes af Philips, et
autoriseret Philips-serviceværksted eller en tilsvarende kvalificeret
fagmand for at undgå enhver risiko.
- Dette apparat kan bruges af børn fra 8 år og opefter og personer med
nedsatte fysiske, sensoriske eller mentale evner eller manglende erfaring
og viden, hvis de er blevet instrueret i sikker brug af apparatet og forstår
de medfølgende risici. Rengøring og brugervedligeholdelse må ikke
foretages af børn, medmindre de er over 8 år og er under opsyn. Hold
apparatet og dets ledning uden for rækkevidden af børn under 8 år.
- Lad ikke børn lege med apparatet.
- Lad aldrig ledningen hænge ud over kanten af det bord eller den plads,
som apparatet står på.
- Apparatet må kun bruges sammen med den originale basisenhed.
- Lad ikke vand eller en fugtig klud komme i kontakt med
tilslutningsdelene på basisenheden og på undersiden af mælkekanden.
Forsigtig
- Brug aldrig tilbehør eller dele fra andre fabrikanter, eller tilbehør/dele
som ikke specifikt er anbefalet af Philips, da reklamationsretten i så fald
bortfalder.
- Fjern ikke spoleholderen fra akslen, da dette kan beskadige den.
- Brug kun apparatet til at opvarme eller opskumme mælk. Brug ikke
apparatet til at behandle andre ingredienser.
- Overskrid ikke den angivne maksimummarkering på
mælkeopskummeren. Hvis der fyldes for meget mælk i
mælkeopskummeren, kan der slippe varm mælk ud under låget, så man
risikerer at blive skoldet.
- Bunden af kanden er varm, hvis du hælder mælken ud med det samme
efter opvarmning eller skumning.
- Flyt ikke apparatet, mens det er i brug, for at undgå at varm mælk slipper
ud under låget.
- Korrekt rengøring af mælkeopskummeren er afgørende for, at den
fungerer optimalt og producerer skum af den rette konsistens.