Maintaining And Cleaning The Vacuum Cleaner; Troubleshooting - Dometic CV 1004 Instrucciones De Montaje

Maintaining and cleaning the vacuum cleaner

9 Maintaining and cleaning the vacuum
cleaner
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the product.
➤ Occasionally clean the product with a damp cloth.
10

Troubleshooting

I
NOTE
The vacuum cleaner is equipped with a thermal overload protection
which prevents the motor from overheating.
If the motor stops, switch the device off by setting the switch to posi-
tion "O" or disconnecting the suction hose from the external hose
socket.
Let the device cool down for around 1 hour. If this fault still occurs fol-
lowing the troubleshooting measures described below, then
please contact the manufacturer or your dealer.
If the motor stops, switch off the vacuum cleaner and proceed as follows:
➤ Check whether the suction hose is blocked.
Hold the suction hose up and drop a small coin in from above. If the coin
does not fall through the hose, it is blocked. Push the dirt ball through the
hose using a long rod.
➤ Check the dust bag.
If a large amount of dirt which is not household dust (plasterboard dust,
fine sawdust etc.) is vacuumed up, the pores in the dust bag can get
blocked.
Insert a new dust bag.
16
CV1004
EN