Changing The Dust Bag - Dometic CV 1004 Instrucciones De Montaje

CV1004
8.3

Changing the dust bag

A
NOTICE!
It is important for vacuum cleaner suction that the dust bag is fitted
correctly. Please follow the instructions carefully, see fig. e,
page 6 to fig. l, page 7.
I
NOTE
•
The dust bag has two openings. One of the two ends has two
arrows. This end must be attached on the device with the arrows
pointing upwards (fig. j, page 7). Make sure the dust bag is fit-
ted in the correct position.
•
Firstly remove the opening from the connecting nozzle in the
device and then remove the other opening from the connecting
nozzle on the front of the device. Hold the openings upwards to
prevent any dust falling out.
•
Replace or clean the motor filter after you have changed the dust
bag five times.
➤ Change the dust bag (fig. e, page 6, to fig. l, page 7).
8.4 Replacing and cleaning the motor filter
I
NOTE
Replace or clean the motor filter after you have changed the dust
bag five times or if it is heavily soiled.
You can wash the motor filter by hand in mild soapy water. Do not
wash it in a washing machine or with hard objects. Leave it to dry
before fitting it in the vacuum cleaner in the direction of the arrows.
➤ Remove the motor filter and insert a new one or reinsert the cleaned motor
filter (fig. m, page 7 and fig. n, page 7).
EN
Using the vacuum cleaner
15