Minimize Wear And Avoid Damage - Stihl FSE 52 Manual De Instrucciones

Ocultar thumbs Ver también para FSE 52:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
Minimize Wear and Avoid
Damage
Observing the instructions in this manual
helps reduce the risk of unnecessary
wear and damage to the power tool.
The power tool must be operated,
maintained and stored with the due care
and attention described in this
instruction manual.
The user is responsible for all damage
caused by non-observance of the safety
precautions, operating and maintenance
instructions in this manual. This includes
in particular:
Alterations or modifications to the
product not approved by STIHL.
Using tools or accessories which
are neither approved or suitable for
the product or are of a poor quality.
Using the product for purposes for
which it was not designed.
Using the product for sports or
competitive events.
Consequential damage caused by
continuing to use the product with
defective components.
Maintenance Work
All the operations described in the
"Maintenance Chart" must be performed
on a regular basis. If these maintenance
operations cannot be performed by the
owner, they should be performed by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
FSE 52
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
If these maintenance operations are not
carried out as specified, the user
assumes responsibility for any damage
that may occur. Among other things,
this includes:
Damage to the motor due to neglect
or deficient maintenance (e.g. not
cleaning cooling air inlets).
Damage due to incorrect electrical
connection (voltage, inadequately
rated connecting cords).
Corrosion and other consequential
damage resulting from improper
storage.
Damage to the product resulting
from the use of poor quality
replacement parts.
Parts Subject to Wear and Tear
Some parts of the power tool are subject
to normal wear and tear even during
regular operation in accordance with
instructions and, depending on the type
and duration of use, have to be replaced
in good time. Among other parts, this
includes:
Cutting attachment
Deflector
Carbon brushes
English
35
Tabla de contenido
loading

Tabla de contenido