Mounting The Loop Handle; Adjusting The Handles - Stihl FSE 52 Manual De Instrucciones

English
3 3
Use T20 screwdriver to fit and
N
tighten down the screws (3) firmly.
A flathead screwdriver may also be used
to install and tighten down the screws.
28

Mounting the Loop Handle

4
2
3
Hold the loop handle (1) so that its
N
pores face the lock button (2).
Ease the ends of the loop handle (1)
N
slightly apart and push it onto the
control handle (3) until it snaps into
position.
Insert the screw (4) through the
N
holes.
Screw on the star knob (5) and
N
tighten it down firmly.

Adjusting the Handles

Adjusting the Loop Handle
1
Loosen the star knob (4).
N
Swing the loop handle (5) in the
N
5
direction of the arrow and engage it
in the required position.
Tighten down the star knob (4)
N
firmly.
5
4
FSE 52