10.14 Chest harness
To change the width of the chest harness. Lift
the front cover, adjust the Velcro straps to the
desired width and replace the cover.
10.15 Trunk harness
When the child is out of the seating system
the trunk harness will be open but remain
attached by two side clips (A) on one side
and one pelvic harness clip (B). When placing
the child in the seating system bring the
trunk harness across the front and attach by
connecting the clips into the buckles on the
other side (C).
Connect the remaining straps into the pelvic
harness or Pelvic Cradle by feeding them
through the loop (D) and snapping into place.
Then connect the shoulder straps (E) into the
clips at the top.
If your child is wearing outdoor clothing,
the side straps can be opened by releasing
the snap fasteners. The pelvic harness
connecting strap can be released by moving
the strap to the lower snap fastener position.
All the connecting straps are adjustable by
lifting the cover, adjusting to the desired
length and replacing the cover.
Check the laterals and harnesses
regularly to ensure they have not
become loose as without appropriate
trunk support the child may be at risk
of slipping into a position they cannot
recover from. This could present a
choking hazard.