Leckey Mygo Instrucciones De Usuario página 21

7.16 Retrofitting the
Dynamic Backrest
To replace the standard static backrest with
the dynamic backrest first of all you will
need to remove the screw (c) at the top of
the standard backrest assembly. To do this
loosen the nut (a) using the Leckey tool and
a 10mm spanner and remove the screw and
washers (b).
Again using the Leckey tool and the 10mm
spanner, loosen the nut (a) at the bottom of
the standard backrest assembly then remove
screw (c) saddle washers (d) and standard
washers (b).