S&P HTB-2500 Manual De Instalacion Y Uso página 17

• Point the remote control towards the upper decorative cover to control the ceiling fan.
• Press the button to switch the device on/off. The system uses radio frequency, so the
remote should work up to 15 meters away (new batteries).
• The fan has 6 speeds. Speed 1 is the lowest and 6 is the highest. Press the 1-2-3-4-5-6
buttons to increase/decrease the speed. The fan buzzes each time it receives an order from
the remote control.
8. TIMER
• Press the button on the remote to program the timer on the fan for 1H - 2H - 4H - 8H.
After the time selected, the ceiling fan will switch off automatically.
• The LED lights on the remote show how long the timer is set for.
9. MAINTENANCE
WARNING: Before beginning any maintenance on the fan, make sure it is switched off at
the mains.
1. Periodic cleaning is the only maintenance required.
2. Clean the outside without disassembling using a damp cloth (don't use abrasive deter-
gents).
3. Do not use abrasive cleaning agents as they may damage the fi nish on the product.
4. Never spray water onto the device nor onto the blades.
5. When cleaning, remove the upper decorative cover to check the ceiling bracket is properly
in place and the screws are tightened.
WARNING: When cleaning or doing maintenance, be careful not to lean on the blades, as they
may become misaligned and cause the fan to swing more.
10. DECOMMISSIONING AND RECYCLING
CEE regulations and our commitment to future generations oblige us to recycle
materials. So, we ask you to please put all remaining packaging in the proper recy-
cling bins and take any devices replaced to the nearest waste management service.
17