Ec Declaration Of Conformity - Makita 9561CR Manual De Instrucciones

ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Wheel guard (Wheel cover)
• Inner flange
• Depressed center wheels
• Lock nut (For depressed center wheel)
• Rubber pad
• Abrasive discs
• Lock nut (For abrasive disc)
• Lock nut wrench
• Wire cup brush
• Wire bevel brush 85
• Side grip
• Diamond wheel
• Dust collecting wheel guard
For Model 9561CR, 9561CVR, 9562CR, 9562CVR
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-3:
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Cutting-off or wire brushing may have different vibration
emission values.
For Model 9564CR, 9564CVR
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-3:
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Cutting-off or wire brushing may have different vibration
emission values.
10
ENG101-1
): 83 dB (A)
pA
ENG208-2
2
): 8.5 m/s
h,AG
2
ENG101-1
): 83 dB (A)
pA
ENG208-2
2
): 8.0 m/s
h,AG
2
For Model 9565CR, 9565CVR
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-3:
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Cutting-off or wire brushing may have different vibration
emission values.
EC-DECLARATION OF CONFORMITY
9561CR, 9561CVR, 9562CR, 9562CVR, 9564CR,
9564CVR, 9565CR, 9565CVR
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN50144, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
): 82 dB (A)
pA
2
): 8.0 m/s
h,AG
2
CE 2008
Director
ENG101-1
ENG208-2
ENH001-8