Fein ASW18-6 Instrucciones De Uso página 16

OBJ_BUCH-0000000252-002.book Page 16 Friday, July 14, 2017 9:34 AM
en
16
Mounting the angle head (ASW 18-18/ASW 18-18 PC/ASW 18-30 PC/
ASW 18-45 PC/ASW 18-60 PC) (figure 6).
Loosen the clamping sleeve with the hook
wrench and remove it.
Clean the mounting surface using a clean cloth
and a degreasing solvent. Apply retaining
compound to the threads.
Pay attention that the threads are grease-
free before applying the retaining com-
pound.
Fig. 6
1.
Clamping sleeve
2.
4.
Angle head
Slide the clamping sleeve onto the angle head
and then fasten the securing ring.
Mount the angle head to the neck of the
power tool and pull the clamping sleeve
toward the rear. Lock the clamping sleeve
with the hook wrench.
Additional information: Further information
on replacement of the output can be found
on the Internet under www.fein.com.
ASW 18-30 PC
ASW 18-45 PC
ASW 18-60 PC
Hook spanner
3.
Clamping ring
5.
10.
ASW 18-18
ASW 18-18 PC
6.
8.
7.
M = 15-20 Nm
24
6.
9.