Storage; Maintenance Schedule; Troubleshooting; Technical Data - Dolmar CH-CS Instrucciones De Manejo

Attachment branch assembling method:
- To assemble the attachment branches, follow the above
disassembling method in the reverse order.
Overall inspection
• Tighten loose bolts, nuts and screws.
• Check for damaged parts. Ask Dolmar authorized service center
to replace them.

Maintenance schedule

Operating hour
Whole unit Visually inspect for
damaged parts
All fixing screws and nuts Tighten
Crank case Supply grease
Drive axle Supply grease
Attachment branches Visually inspect for
damaged parts
Supply grease
Power unit Refer to the instruction manual of the power unit

Troubleshooting

Problem
The motor does not start.
The motor stops soon after its start.
The maximum speed is limited.
Attachment branches do not move.
Stop the motor immediately!
The unit vibrates abnormally.
Stop the motor immediately!
The attachment branches do not stop.
Stop the motor immediately!

Technical data

Model
Dimensions (L x W x H)
Mass
Gear ratio

Storage

"Safety precautions" and the instruction manual of the power unit.
(Fig. 11)
When storing the coffee harvester attachment separated from the
power unit, put the cap onto the end of the shaft.
Before Operation
Probable cause
Refer to the instruction manual of the power unit.
The attachment branches are damaged.
A twig is caught by the attachment branches.
The drive system does not work properly.
The drive system does not work properly.
The power unit does not work properly.
7
WARNING: Follow the warnings and precautions in the chapter
Daily
25 h 50 h
(10 h)
Replace the attachment branches.
Remove the foreign matter.
Ask Dolmar authorized service center to
inspect and repair it.
Ask Dolmar authorized service center to
inspect and repair it.
Refer to the instruction manual of the power
unit.
mm
kg
Corresponding page
7
7
6
6
6
6
Solution
CH-CS
1,128 x 347 x 57
1.8
1:3.5