Using With Carrying System - Stihl BGA 100 Manual De Instrucciones

English
► Tighten the straps until the waist belt fits snugly on your
hips and the back padding is against your back.
► Thread the end of the waist belt through the loop (3).
► Fit the hip pad as described in the instructions supplied
with the hip pad.
2
► Adjust the strap (1) so that the carabiner (2) is about a
hand's width below your right hip.
7.2

Using with Carrying System

7.2.1 Fitting and Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted to suit the
user's size and the application.
32
3
1
1 2
The connecting cable can be fitted through the following
openings:
– the upper left opening (1)
– the upper right opening (2)
– the lower left opening (3)
– the lower right opening (4)
1 2
5
6
► If the connecting cable is fitted through the upper left
opening (1) or the upper right opening (2):
► Open the press studs (5).
► Lay the connecting cable over the shoulder strap (6).
► Close the press studs (5).
► If the connecting cable is fitted through the lower left
opening (3) or the lower right opening (4): Seal the
opening you use (3 or 4) with the hook and loop fastener
(7).
7 Adjusting Blower for User
3
4
3
4
7
0458-711-9821-B