Warning Symbols; Machine Symbols - Garland BEST 710 DPG Manual De Instrucciones

English

3. WARNING SYMBOLS

Warning labels indicate required information for the
use of the machine.
Warning and care.
Do not let people enter in the work
area. This area will be of a diameter
of 15 meters from the point in which
you are working.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool can
project hard objects.
Caution! Maximun speed of gear
XXXX min
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
Sense of rotation.
Attention !: Maximum speed
of the cutting attachment.
XXXX min -1 . XXXX min -1 .
Attention!: Insert to the
bottom
-1
.
Attention!, Danger!: The cutting tool
can project hard objects.

4. MACHINE SYMBOLS

In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Fuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
0
Positions start switch located on the right
STOP -
handle of the machine.
"O" = Off (The machine don´t work)
I
"I"= On (The machine is ready to work)
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95 and
synthetic oil for 2 stroke engines to
2.5% (40:1).
START
Starter handle
Oil tank chain. Located in the oil tank cap of
the chain.
44/174
Chain oil flow adjustment.