Alpine PWD-X5 Manual De Instrucciones página 16

Connection Diagram
① Main machine USB port connects to the
computer via USB3.0 cord. Start PWD-X5
software to switch sound sources of main
machine and perform such functions as data
storage, calling and EQ. USB port connects
to the wired controller via USB3.0 cord and
perform functions including switching sound
source, data calling and adjusting master
volume via the wired controller.
➁ The main machine is equipped with an
external Bluetooth interface to play lossless
music via the external digital Bluetooth and
connect to PWD-X5 app. After the Bluetooth
is connected, the indicator light will be on.
➂ AUX input interface connects to in-vehicle
CD or DVD low-level output, switches the
machine sound source to AUX input and
plays low-level signals.
➃ REM input switch. When the switch is
placed on the "REM"-end, REM will start the
machine. If the switch is placed on the "DC"-
end, the high-level input signal will start the
machine.
➄ In-vehicle CD or DVD main machine.
➅ High-level input and power input interface
connects to in-vehicle CD or DVD. If the sound
source switches to high-level, the machine will
play high-level signals.
➆ The amplifier output of the main machine
connects to the speaker
➇ The machine is connected to the power
supply.
Notes:
● Original cables for designated vehicles only.
● High-level REM input (HOST): for these two
high-level input cables of H1+/H3+.
15