Set A Sleep Or Alarm Timer - Nyne NH-6000 Manual Del Usuario

Set a sleep or alarm timer

Set a sleep timer
You can set a sleep timer so that the
device switches to standby mode
automatically at the preset time.
The available intervals of sleep time
include 00, 05, 10, 15, 20, 25, 30, 40, 50,
60, 70, 80, and 90 (unit: minute).
1
When the device is turned on,
press
control (or tap
panel) twice.
"SLEEP XX" is displayed on the LED
+
screen. "XX" indicates the interval
of sleep time.
2
Press
control to confirm.
"SLEEP XX" starts to flash.
+
3
Press
control (or tap
panel) repeatedly to select an
interval of time, and then press
to confirm the set sleep
timer.
To view the remaining time of the set sleep timer:
• Press
control (or tap
panel) twice.
To deactivate the sleep timer:
• Select "SLEEP 00" at step 3 in the
above, and then press
the remote control to confirm.
Tip:
•
During sleep timer setting, if there is
no operation within six seconds, the
current settings will be cancelled.
NYNE NH-6000_User Manual_A5.indb 19
on the remote
on the top
on the remote
on the remote
on the top
on the remote
on the top
on
Set an alarm timer
You can set an alarm timer that
wakes you up at the preset time, with
the built-in buzzer or music from your
docked iPod/iPhone/iPad.
1
When the device is turned on,
press on the remote
control (or tap
panel) for a third time.
"ALM" is displayed on the LED
+
screen.
The indicator on the top panel +
flashes.
2
Press on the remote
control to confirm.
"ON" or "OFF" is displayed on the
+
LED screen.
3
Press on the remote
control (or tap
panel) repeatedly to select "ON",
and then press
The hour digits start to flash.
+
4
Press on the remote
control (or tap
panel) repeatedly to adjust the
hour, and then press
confirm.
The minute digits start to flash.
+
5
Press on the remote
control (or tap
panel) repeatedly to adjust the
minute, and then press
confirm.
A source icon ("iPod" or "BUZZ") is
+
displayed on the LED screen.
6
Press on the remote
control (or tap
panel) repeatedly to select your
preferred alarm source.
on the top
on the top
to confirm.
on the top
to
on the top
to
on the top
EN 19
5/17/2012 9:30:35 PM