Goetze 617 Serie Manual De Uso página 10

Assembly and maintenance instructions
Pressure relief valves / overfl ow valves
1
General Notes of Safety
• Only use the valve:
- for the intended purpose
- in satisfactory condition
- with respect for safety and potential hazards.
• Always observe the installation instructions.
• Faults that may impair safety must be addressed immediately.
• The valves are exclusively intended for the application area stated in these
installation instructions. Any other or further use is not valid as the intended
use.
• The manufacturer's warranty for the setting of the valve shall be null and void
if the sealed cover is removed.
• All assembly work is to be carried out by authorized specialist staff.
2
General Notes
Overflow valves and pressure limiting valves are high-quality fittings which require
a particularly careful handling. The sealing surfaces are precision-machined at
the seat and cone to attain the required tightness. Always avoid the penetration
of foreign particles into the valve during assembly and during the operation. The
tightness of a pressure limiting / overflow valve can be impaired when using hemp,
Teflon tape, as well as through welding beads, among other things. Also rough
handling of the finished valve during storage, transport and assembly can result in a
valve leaking. If the valves are painted, make sure that the sliding parts do not come
into contact with the paint.
10
www.goetze-armaturen.de
en