Boneco 2055A Manual De Uso página 13

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Cleaning the water tank and base
(every 2 weeks)
• Lift the water tank out of the unit, open the water tank
cap and clean the tank (33 – 35).
• Lift the upper part of the unit off the base (36).
• Use EZCal and EZCal PRO custom cleaning and des­
caling agents only to remove deposits from the water
base regularly (37). There is a sample of EZCal included
in the packaging of your humidifier. Instructions for
using are on the packet. Rotate the disc assembly a
few times by hand (37) to clean the mineral deposits
on the humidifying discs. Only use 1 packet for 32
oz of water. Do not change the ratio. Do NOT run the
unit when using EZCal and EZCal PRO. This can cause
damage to the product and voids the warranty. Tho­
roughly rinse the base with tap water after using EZCal
and EZCal PRO and make sure no EZCal and EZCal
PRO residues remains in the base.
• Empty the water base (38), remove the disc assembly
(39) and rinse (40).
• Remove deposits from the base using a plastic or
wooden brush (41).
Cleaning the humidifying discs
(every 4 weeks)
A thin film of lime scale on the discs actually increases
the humidity output! To clean, unscrew the individual humi­
difying discs from each other. Rotary locks (toothed wheels)
can be easily removed using the multifunctional fragrance
container (42).
Next, the discs can be washed individually (43 – 44). For
best results use EZCal and EZCal PRO custom cleaning
agents. Refer to section «Cleaning the water tank and base»
for more information of how to use EZCal and EZCal PRO.
• The toothed wheel can only be assembled in one
position.
After cleaning, reassemble the appliance in the reverse se­
quence. Note: rotary locks have two rest positions. Warning:
Do not overtighten!
33
34
35
36
en
13
Tabla de contenido
loading

Tabla de contenido