Sony Cyber-shot DSC-TX5 Manual De Instrucciones página 9

Camara fotografia digital
Ocultar thumbs Ver también para Cyber-shot DSC-TX5:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

• Do not open/close
the battery/memory
card cover or multi-connector
cover
with wet or sandy hands or near water. There is a risk this will lead to sand or
water getting
inside. Before opening
the cover, perform
the procedure
described
in "Cleaning
after using the camera
under/near
water".
• Open the cover with the camera completely
dry.
• Always
confirm that the battery/memory
card cover and multi-connector
cover have been securely locked.
Notes
on using the camera
under/near
water
Do not subject the camerz_ to shock such as from jumping
into v_:_ter.
Do not open and close the battery/memory
card cover or multi-connector
cover while under/near
water.
Use a separately
available
housing (Marine
Pack) if' going more than
3 meters under water.
This camera
sinks in water. Place your hand through
the wrist strap to
prevent the camera
from sinking.
Faint, white, circular
spots may appear in under-water
flash photos due to
reflections
off of floating
objects.
This is not a malfunction.
Select _
(Underwater)
in Scene Selection
to shoot underwater
with less
distortion.
If water drops or other foreign
matter is present on the lens, you will be
unable to record clear images.
Cleaning
after using the camera
under/near
water
• Alv_z_ys clean the camera
with wz_ter after use
within 60 minutes,
and do not open the battery/
memory
card cover before cleaning
is finished.
Sand or water may get inside places where it
cannot be seen. If not rinsed, water-proof
perlbrmance
will be degraded.
• Allow the camera
to sit in pure water poured
into a cleaning
bowl for more
than 5 minutes.
Then, gently shake the camera,
press each button, slide the
zoom (W/T) lever or the lens cover inside the water, to clean away any salt,
sand or other matter lodged around
the buttons
or the lens cover.
• After rinsing, wipe away water drops with a soft cloth. Allow the camera
to
dry completely
in a shady location
with good ventilation.
Do not blow dry
with a hair dryer as there is a risk of deformation
and/or degraded
water-
proof performance.
• This camera
is constructed
to drain water. Water will drain from openings
around the (-)N/OFF (Power)
button, zoom (W/T) lever, and other controls.
After removing
from water, place the camera on a dry cloth for a while to
allow water to drain.
• Bubbles
may appear when the camera
is placed under water. This is not a
malfunction.
G B
GB
9
Tabla de contenido
loading

Tabla de contenido