Displaying And Deleting Measurements - Beurer BC 50 Instrucciones De Uso

6. Displaying and deleting measurements

User memory
The results of every successful measurement are stored to-
gether with the date and time. If there are more than 60 meas-
urements, the oldest measurements are lost.
• To access memory recall mode, press the M1 or M2 memory
button to select your desired user memory (
– To view the measurements for user memory
memory button.
– To view the measurements for user
memory , press the M2 memory
button.
Your last measurement will appear on
the display.
Average values
• Press the relevant memory button (M1 or M2).
Press the M1 button if you have selected user memory 1.
Press the M2 memory button if you have selected user
memory 2.
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1
or M2).
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button (M1
or M2).
).
PM flashes on the display.
press the M1
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
Individual measured values
• When the relevant memory button (M1
or M2) is pressed again, the last indi-
vidual measurement is displayed (in this
example, measurement 03).
• When the relevant memory button (M1
or M2) is pressed again, you can view
your individual measurements.
• To switch the device off again, press the START/STOP but-
ton .
You can exit the menu at any time by pressing the START/
STOP button
Deleting measured values
• To clear the memory of the relevant user memory, you must
first select a user memory.
22
.