Scope Of Delivery And Accessories; Instructions For Use (Qualified Personnel); Preparation For Use - Ottobock 9E369 Instrucciones De Uso

CAUTION
Penetration of product with dirt and humidity
Injury due to unexpected product behaviour or malfunction.
► Ensure that neither solid particles nor liquids can penetrate into the product.
CAUTION
Independent manipulation of the product
Injury due to product damage or malfunction.
Manipulations to the product other than the tasks described in these instructions for use are
►
not permitted.
► The product and any damaged components may only be opened and repaired by authorised,
qualified Ottobock personnel.
CAUTION
Mechanical stress on the product
Injury due to faulty control or malfunction of the product.
► Do not subject the product to mechanical vibrations or impacts.
► Check the product for visible damage before each use.

5 Scope of Delivery and Accessories

9E369 4in1 controller scope of delivery
• 1 pc. 9E371 contact plate (see fig. 1, item 1)
• 1 pc. 9E372 casting plate (see fig. 1, item 2)
• 1 pc. 9E373 controller (see fig. 1, item 3)
• 1 pc. 647H209 instructions for use (qualified personnel)
9E370 4in1 controller scope of delivery
• 1 pc. 9E371 contact plate (see fig. 1, item 1)
• 1 pc. 9E372 casting plate (see fig. 1, item 2)
• 1 pc. 9E374 controller (see fig. 1, item 3)
• 1 pc. 647H209 instructions for use (qualified personnel)
Accessories
• 1 pc. 13E182 coding plug set

6 Preparation for use

INFORMATION
Integrating carbon fibre layers continuously from the area of the wrist joint to the electrode area
is not advisable.
1) Apply silicone grease to the coding plug and cable connectors.
2) Connect the corresponding coding plug (see fig. 2, item 1) to the controller.
INFORMATION: Insert the coding plug to the stop.
3) Connect the battery.
INFORMATION: If the coding plug is changed, the battery has to be removed and rein­
serted AFTER connecting the coding plug. If the battery is not removed, the controller
is operated in the previous control version.
4) Connect the OPENING electrode at 2
5) Connect the CLOSING electrode at 1
.
.
Ottobock | 13