Explanation Of Warning Symbols; Structure Of The Safety Instructions; General Safety Instructions - Ottobock 9E369 Instrucciones De Uso

3.3 Conditions of use
The product is intended exclusively for use on one patient. Use of the product by another person
is not approved by the manufacturer.
3.4 Qualification
Fitting a patient with the product may only be carried out by orthopaedic technicians who have
been authorised by Ottobock after completion of a corresponding training course.
4 Safety

4.1 Explanation of warning symbols

Warning regarding possible risks of accident or injury.
CAUTION
NOTICE Warning regarding possible technical damage.

4.2 Structure of the safety instructions

CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried out in order to avert
the hazard.

4.3 General safety instructions

CAUTION
Damage to connecting cable due to kinking or small radii
Injury due to unexpected product behaviour as a result of a malfunction.
► Replace the damaged connecting cable immediately.
CAUTION
Use of unsuitable prosthetic components
Injury due to unexpected product behaviour.
► Use the product only in combination with components listed in the section "Combination
Possibilities" (see Page 10).
CAUTION
Incorrect assembly
Injury due to faulty control or malfunction of the product.
► During assembly, pay special attention to the section "Preparation for use" in these instruc­
tions for use.
CAUTION
Incorrect electrode settings due to muscle fatigue
Injury due to faulty control or malfunction of the product.
► Allow the patient to rest during the adjustment of the electrodes.
Ottobock | 11