Phonic CELEUS 200 Manual Del Usuario página 10

34. Graphic Equalizer
This graphic equalizer allows you to adjust the frequency
response of the main signal, with a maximum of ±12 dB of
signal boost or cut for each of the frequencies.
35. Power Indicator
This indicator illuminates when power is activated.
36. Master L/R Level Controls
These rotary controls are the final level control for the Master
Left and Right audio sends, sent to the Main Outputs on the
rear. When turned all the way up, the Main L/R controls
provide 10 dB of gain to the signal. When set all the way
down, the signal is effectively muted. These will also adjust
the final output level of the signal sent through the USB
interface to the computer.
37. Level Meter
This dual 41 segment level meter gives an accurate indication
of when audio levels of the Main L/R signal reach certain
levels. The 0 dB indicator illuminates is approximately equal to
an output level of +4 dBu (balanced), and the PEAK indicator
illuminates about 1.5 dB before the signal is dynamically
clipped. To make the maximum use of audio, set the various
level controls so that it sits steadily around 0 dB to make full
use of audio, while still maintaining fantastic clarity.
USB Recorder Description
The USB Recorder's source signal is taken directly from
each individual input channel. When playing audio, the
signal will pass through Channel 4 when the USB PLAYER
button is engaged. The CELEUS 200 supports playback of
WMA and MP3 files with bit rates of up to 320 kbit/s.
42
41
36
6
38. USB Port
Connect your USB flash drive to this input. Once a drive
is connected, the files will initiate and the main menu will
appear on screen. Users are advised to format their USB
memory sticks with a FAT-32 file system. This connector
can also be used to connect to your PC to take advantage of
the onboard storage.
39. Display
This display will display the track number currently being
played. It also offers play, pause and record indicators as
well as the current play/record time.
40. Play Button
Push this button to start and stop playback and recording
of the currently displayed track. Starting a track after it is
paused will resume the track from the point at which it was
paused (in both record and playback mode).
41. Back/Next Buttons
Pushing these buttons will allow users to skip back and
forwards between tracks. When the menu is activated,
these buttons are used to scroll through on screen options.
42. Stop/Menu Button
Push this button to stop playback or recording when
applicable. Push and hold the button to access the USB
recorder/player's main menu.
34
38
43. Wireless Pairing Switch and Indicator
This switch turns the Bluetooth function of the CELEUS
39
200 on and off. The "WIRELESS READY" LED will light up
when a connection is established between most Bluetooth-
enabled Smartdevice and the CELEUS. The bluetooth
40
signal is fed through channel 3. Ensure the channel's "BT"
button is engaged on this channel. The CELEUS 200 will
appear as Phonic.BT in your device's bluetooth selection
35
menu.
44. +48V Indicator
This LED indicator will light up when Phantom Power is
activated on microphone inputs.
37
43
CELEUS 200
44