Tabla de contenido
11
7. Loosen screws used to
fix the middle hinge and
remove middle hinge. Then
remove the lower door.
8. Place the lower door on a
smooth surface with its
panel upwards. Loose
screw ③
a
nd take down
part ②
nd part ①, Install
a
replacement door stopper-
left ④ provided (in the
plastic bag) and part ②
(stop block) to the left side
with screw ③. Keep part
①
with
the appliance for
future reference.
① Door stopper
② Stop block
③ Self-tapping screw
①
②
③
9. Change screw hole
covers and screw on middle
cover plate from left to right
(as shown in figure below).
10. Tip the refrigerator back
wards, remove part
then remove screws .
①
②
③
④
⑤
① Lower hinge part (right)
② Front foot fixed board
③ Adjustable bottom feet part
④ Self-tapping screws
⑤ Adjustable bottom feet part
11. Remove part
the lower hinge pin, loose
out the lower hinge pin,
change it to the reverse hole
site, and then tighten into
position, then install part
on the lower hinge pin.
12. Remove part ③ from
the part②, then remove
screws④,screw part ③ to
the reverse hole site.
②
③
④
② Front foot fixed board
③ Adjustable bottom feet part
④ Self-tapping screws
③
and
④
⑤
from
⑤
Tabla de contenido
