Cleaning And Maintenance; Noise Emission; Technical Data; Disposal - Clatronic HSM R 3313 Instrucciones De Servicio

Máquina de barbear e de cortar cabelo
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Finish Operation
Slide the switch (4) down.

Cleaning and Maintenance

Regular cleaning and maintenance ensures optimum results
and long lifetime.
Turn the unit off and disconnect from mains power supply,
if necessary.
WARNING:
Do not submerge the unit in water.
CAUTION:
Do not use a wire brush or other abrasives.
Do not use sharp or abrasive cleaning agents.
Use the cleaning brush to remove remaining hair after use.
Remove the attachment comb (1).
Press the two buttons (2) at the rear of the unit to fold out
the clipper head.
Regularly apply 1 - 2 drops acid-free oil to the clipper head.
Fold the clipper head back after cleaning until it locks in
place.
Clean the casing with a slightly damp cloth, if necessary.
Replace the attachment comb.

Noise emission

The workplace-related emission value is less than 70 dB(A).

Technical Data

Model: .......................................................................HSM/R 3313
Power supply adaptor: ................. AC 100-240 V, 50/60 Hz, 3 W
Output power adaptor: ....................................DC 4.5 V, 150 mA
Protection class power adaptor: ................................................. ΙI
Rechargeable battery: ..........................................1.2 V, 800 mAh
Run time:.............................................................max. 35 minutes
Charging time battery: .....................................................14 hours
Net weight: .......................................................................0.140 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and is
manufactured according to the latest safety regulations.
26
Remove / Dispose of Rechargeable Batteries
This unit is equipped with a rechargeable Ni-MH battery.
Remove the battery before disposing of the unit.
As a consumer you are legally bound to return exhausted bat-
teries/rechargeable batteries.
WARNING:
Disconnect from mains power supply before removing the
battery!
Loosen the screws at the bottom with a small Phillips
screwdriver; remove the bottom of the unit.
Remove the rechargeable battery.
Cut the wires to the battery with a pair of scissors.
Return the battery at a collection point for batteries and/or
hazardous waste. Ask your municipality for further information.

Disposal

Meaning of the "Wheelie Bin" Symbol
Take care of our environment, do not dispose of electrical ap-
plicances via the household waste.
Dispose of obsolete or defective electrical appliances via
municipal collection points.
Please help to avoid potential environmental and health
impacts through improper waste disposal.
You contribute to recycling and other forms of utilization of old
electric and electronic appliances.
Your municipality provides you with information about collecting
points.
Tabla de contenido
loading

Tabla de contenido