Tabla de contenido
2
4
Sewing on buttons
Move the drop feed control to right side to lower the feed
dogs. (1)
Change presser foot to button sewing foot. (2)
Position the work under the foot. Place the button in the
desired position and lower the foot. Set the pattern selector
knob on " ', " sew a few securing stitches. Select one of the
I
two narrow
zig zag
patterns
according
to the distance
between the two holes of the button. Turn the handwheel to
check if the needle goes into the right and the left hole of
the button without hitting the button.
Slowly
sew on the button with about
10 stitches.
Select
VV
I
pattern
, "sew a few securing
stitches.
(3)
I
If a shank is required,
place a darning needle on top of the
button and sew (4). For buttons with 4 holes, sew through
the front two holes first (3), push the work forward and then
sew through the back two holes. (4)
46
Tabla de contenido
