SoundPort Compact
Operating instructions
Audio playback / Adjusting the volume
Audio playback
An audio source must be connected or linked with the SoundPort Compact.
In the source selection this audio source must be selected (see page 36).
The LED display
Start the audio playback on your audio source. The playback control (title selection,
winding, etc.) is done via the player/app of the audio source.
Adjusting the volume
When using an audio cable connection (see page 38) adjust the volume of your
audio source to a high level to avoid interfering noise. Adjust the desired volume on
the SoundPort Compact.
When connecting iDevices via Bluetooth (see page 41) the volume adjustment
between iDevice and SoundPort Compact is coupled, i.e. change in the volume of one
of the devices alters the volume of the other one.
Loud music can lead to ear damage. Avoid extreme volume especially over long periods.
After 10 minutes without audio playback or key operation, SoundPort Compact auto-
matically switches to Smart Standby mode.
The LED display
Set the volume on the SoundPort Compact using the keys +
The volume can be adjusted in 24 steps which are represented visually by four LEDs of
the LED indicator
Vol -
Vol +
Pressing briefly the key +
MIN
MAX
When keeping the + or - key depressed you traverse the whole volume range.
The maximum volume is indicated by two flashes of all LEDs with full brightness.
If there is no volume change within three seconds, the LED display
of the selected source again.
Mute the SoundPort Compact by pressing the + and - keys simultaneously. All four LEDs
of the LED display
By pressing the + or - key the muting is cancelled. The LED display shows the previously
selected source again.
46
8
shows the selected source, e.g., USB Audio.
8
indicates the selected source, e.g., Apple Lightning Connector.
.
8
4
or –
5
increases or decreases the volume by one step.
8
flash with full luminous intensity.
4
and –
5
.
8
shows the colour