Start-Up; Switching On/Off; Connecting To The Mains Supply; Switching Off - Loewe Audiodesign SoundPort Compact Instrucciones De Manejo

SoundPort Compact
Operating instructions

Start-up

Switching ON/OFF

Connecting to the mains supply

Remove from SoundPort Compact the cable cover
Plug the mains cable into the mains socket
Switching on
When switched off, the LED display is
Switch the power switch
The SoundPort Compact is in the Standby mode.
The middle two segments of the LED display
Press the ON/OFF key
The LED display
When switching on later, the last selected source remains active.
For the colours of the LED display for each source, see page 36.
After 10 minutes without music playback, receiving or sending a call, pressing a key on
the SoundPort Compact or on the Assist remote control (see page 49), connecting
or disconnecting a device and running a sync process, the SoundPort Compact will
automatically switch to Smart Standby mode.
For further information on the energy modes see page 48.

Switching off

Press the ON/OFF key
The SoundPort Compact switches to the Standby mode.
The middle two segments of the LED display
After 4 hours in Smart Standby mode, the SoundPort Compact automatically switches
to the Standby mode.
For further information on the energy modes see page 48.
13 on the rear side of the device.
12
and connect it to a 220-240 V 50/60 Hz socket.
13
8
11
to position ON.
1
on the unit.
8
lights up green on the very first start (AUDIO IN source).
1
on the unit.
12
dark.
8 light dimmed.
8 light dimmed.
35