Sound Settings; Charging The Audio Source - Loewe Audiodesign SoundPort Compact Instrucciones De Manejo

SoundPort Compact
Operating instructions

Sound settings

Charging the audio source

Sound settings
With your SoundPort Compact you have the possibility to select predefined sound settings for audio
playback.
Selecting the sound settings
SRC
Press the SRC key
The LED display
Press the + key
If no key is pressed for a few seconds, the previously selected source will be indicated again.
LED display of the sound settings
1 LED display:
2 LED displays:
3 LED displays:
4 LED displays:
Charging the audio source
You may charge the battery of your audio source, e.g., a mobile phone, iPad, etc. via your SoundPort Compact.
The power switch of the SoundPort Compact must be switched on.
Only one device should be charged at the same time.
Charging of iDevices at the Lightning Connector:
Plug your iDevice with Lightning Connector on the Lightning Connector
SoundPort Compact (see pages 39 and 40).
Charging of USB audio sources:
Connect the type A plug of the USB cable into the USB socket
To do this, use a USB cable with type A plug suitable for your audio source (commercially
available).
The connected device (Lightning / USB) is charged in both the operating and the
Smart Standby mode of the SoundPort Compact. The audio source will not be charged
in Standby mode.
2
on the SoundPort Compact for a longer period (approx. 2 sec).
8
shows the last selected sound setting (e.g. classic).
4 5
or – key repeatedly until the desired sound is selected (e.g. flat).
presetting flat
presetting voice
presetting classic
presetting pop
6 built-in in the
16 of the SoundPort Compact.
37