System Reset - Jensen PHASE LINEAR Serie Manual De Instrucciones

Multimedia receiver
Ocultar thumbs Ver también para PHASE LINEAR Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

UV10
c.
Press the |<<, >>|, >>, or << buttons (12, 15, 17,
20) on the remote control to adjust the selected
feature to the desired setting.
Table 4: Audio Adjustments
Audio Function
Adjustable Range
EQ
User
Acoustic
Urban
Rave
Latin
Dance
Hip Hop
Rock
BASS
-14 to +14
MID
-14 to +14
TREBLE
-14 to +14
SUB
-14 to 0
FAD
Grid
BAL
Grid
NOTE: The EQ mode will automatically change to
"USER" when individual audio functions are adjusted.
The Audio menu will automatically exit after a few seconds of
inactivity. To exit quickly, touch the top left corner of the
screen or press and hold the rotary encoder (11).

System Reset

To correct a system halt or other
illegal operation, use the tip of a pen
to press the reset button (12) located
on the front bottom-right corner of the unit. After a system
reset, the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.
Steering Wheel Control (SWC)
The UV10 is compatible with the PAC (Pacific Accessory
Corporation) steering wheel control adapter SWI-PS. A
3.5mm female connector (labeled "SWC Interface") on the
back of the head unit allows connectivity to the PAC adapter.
Please refer to the instructions included with the PAC adapter
for detailed installation information.
SWC Functions
The following controls are available for most vehicles:
1.
Vol Down
2.
Vol Up
3.
Mute
4.
Seek Down / Previous Track / ** Preset Down
5.
Seek Up / Next Track / ** Preset Up
6.
SRC (Source)
7.
** Select
8.
** Select
9.
Band
** If additional steering wheel control buttons are available on
the vehicle, function 7 / 8 may be assigned the "Select"
feature. This feature / function may not be available on some
vehicles.
Select Operation
If "Select" (function 7 or 8) is held down and function 4 is
pressed momentarily, Preset Up will be selected. If "Select"
(function 7 or 8) is held down and function 5 is pressed
momentarily, Preset Down will be selected.
[RESET] Button
7
Tabla de contenido
loading

Este manual también es adecuado para:

Phase linear uv 10

Tabla de contenido