Technical Specifications - Facom NU-CL.CV/1005 Manual De Instrucciones

Machines elements
1 : operating trigger with variator
2 : rotational direction switch
3 : LED light switch
4 : LED - Light Emitting Diode
5 : knurled bit-lock ring (CL.V146)
6 : driving square with spring clip (CL.C1913)
7 : battery release button
8 : rubber protective pads
9 : charge and alarm indicators
10: charger terminals protective cover
SPARE PARTS
A: spare batteries (14,4 V: CL.BA14 – 19,2 V: CL.BA19)
B: universal charger (CL.CH919)
C: spare brushes kit (CL.CBN1) for (CL.C1913) only

Technical specifications

Machines
Drive size
Maximum torque
No-load motor voltage
No-load speed
Impacts per minute
Weight, battery excl.
Batteries
Type
Nominal voltage
Capacity
Weight (battery alone)
Universal charger
Charge capacity
Temperature of use
Dimensions (charger only)
Weight (charger alone)
The universal charger automatically detects the FACOM accumulators charging voltage (9.6 to 19.2
Volts). It automatically regulates when the accumulator is charged, preventing any damage if the set is
left powered-on after the required charging time.
Note: the CL.CH919 universal charger is compatible with all of FACOM electrically powered tools
(CL.P1210, CL.P1413, CL.V146 and CL.C1913)
NU-CL.CV_1005
CL.C1913D
Square 12,7 mm (1/2'')
330 N.m
19,2 V
0 - 2000 rev/min
2500
2,0 kg
CL.BA19
Ni-MH
19,2 V
2,6 Ah
1,1 kg
CL.CH919
9.6 to 19.2 Volt for Ni-Cd and Ni-MH batteries
between 10 °C and 40°C
180 x 116 x 67 mm
0,6 kg
10
CL.V146D
Hexagon 6,35 mm (1/4'')
150 N.m
14,4 V
0 - 2300 rev/min
2600
1,2 kg
CL.BA14
Ni-MH
14,4 V
2,6 Ah
0,8 kg
18/11/05, 9:17